HJ 734-2014 固定污染源廢氣 揮發性有機物 組合2吸附管
如果你感興趣的話，可以電話：0632-5667636 
產品名稱：HJ 734-2014 固定污染源廢氣 揮發性有機物 組合2吸附管
產品型號：HJ 734-2014 固定污染源廢氣 揮發性有機物
產品廠商：浩瀚色譜（山東）應用技術開發有限公司
簡單介紹
組合2吸附管，芝麻香白酒，3-甲硫基丙醇，室內空氣，焦爐煤氣，煉廠氣，天然氣，變壓器油，多氯聯苯，植物油，增塑劑，塑化劑，過氧化物，三甲胺，二甲醚，乙縮醛，醫療器械，胺
HJ 734-2014 固定污染源廢氣 揮發性有機物 組合2吸附管的詳細介紹
組合2吸附管
組合2吸附管 詳細信息：
為貫徹《環境保護法》和《大氣污染防治法》，保護環境，保障人體健康，規范固定污染源廢氣中揮發性有機物的測定方法，制定本標準。本標準規定了固定污染源廢氣中揮發性有機物的固相吸附-熱脫附/氣相色譜-質譜法。本標準為發布。
HJ 734-2014 固定污染源廢氣 揮發性有機物的測定 固相吸附-熱脫附 氣相色譜-質譜法
組合2吸附管 詳細信息：
為貫徹《環境保護法》和《大氣污染防治法》，保護環境，保障人體健康，規范固定污染源廢氣中揮發性有機物的測定方法，制定本標準。本標準規定了固定污染源廢氣中揮發性有機物的固相吸附-熱脫附/氣相色譜-質譜法。本標準為發布。
HJ 734-2014 固定污染源廢氣 揮發性有機物的測定 固相吸附-熱脫附 氣相色譜-質譜法
組合2吸附管，內裝CarbopackB、Carboxen1000，長度分別為30、10mm。
C.2.2 組合 2 吸附采樣管
適用于 C3～C12 范圍內的化合物。在濕度低于 65%、溫度低于 30℃時（含濕量
<1.8%），可采集氣體樣品 2 L；在濕度高于 65%、溫度高于 30℃時（含濕量>1.8%），采
樣體積要降到 0.5 L；對于 C4 以上的化合物，采樣體積可增加到 5 L。老化溫度 350 ℃，
老化流量 100 ml/min
Combination 2 adsorption tubes
Combination 2 adsorption tubes Details:
This standard is formulated in order to implement the Enviro
HJ 734-2014 Waste gas from statio
Combination of 2 adsorption tubes, with CarbopackB and Carboxen1000 inside, the lengths are 30 and 10mm respectively.
5.7 Adsorption tube: stainless steel, inner diameter 5 mm.
Combination 1 adsorption tube with Tenax GR and Carbopack B inside, lengths of 30 and 25 mm, respectively.
Combination of 2 adsorption tubes with Carbopack B and Carboxen 1000 inside, lengths of 30 and 10 mm respectively.
C.2.2 Combination 2 adsorption sampling tube
Suitable for compounds in the range of C3 to C12. When the humidity is lower than 65% and the temperature is lower than 30°C (moisture content
<1.8%), 2 L of gas samples can be collected; when the humidity is higher than 65% and the temperature is higher than 30℃ (moisture content>1.8%),
The sample volume is reduced to 0.5 L; for compounds above C4, the sample volume can be increased to 5 L. Aging temperature 350 ℃,
Aging flow 100 ml/min
5.7 吸附管：不銹鋼材質，內徑 5 mm。
組合 1 吸附管，內裝 Tenax GR、Carbopack B，長度分別為 30、25 mm。
組合 2 吸附管，內裝 Carbopack B、Carboxen 1000，長度分別為 30、10 mm。
C.2.2 組合 2 吸附采樣管
適用于 C3～C12 范圍內的化合物。在濕度低于 65%、溫度低于 30℃時（含濕量
<1.8%），可采集氣體樣品 2 L；在濕度高于 65%、溫度高于 30℃時（含濕量>1.8%），采
樣體積要降到 0.5 L；對于 C4 以上的化合物，采樣體積可增加到 5 L。老化溫度 350 ℃，
老化流量 100 ml/min
Combination 2 adsorption tubes
Combination 2 adsorption tubes Details:
This standard is formulated in order to implement the Enviro
HJ 734-2014 Waste gas from statio
Combination of 2 adsorption tubes, with CarbopackB and Carboxen1000 inside, the lengths are 30 and 10mm respectively.
5.7 Adsorption tube: stainless steel, inner diameter 5 mm.
Combination 1 adsorption tube with Tenax GR and Carbopack B inside, lengths of 30 and 25 mm, respectively.
Combination of 2 adsorption tubes with Carbopack B and Carboxen 1000 inside, lengths of 30 and 10 mm respectively.
C.2.2 Combination 2 adsorption sampling tube
Suitable for compounds in the range of C3 to C12. When the humidity is lower than 65% and the temperature is lower than 30°C (moisture content
<1.8%), 2 L of gas samples can be collected; when the humidity is higher than 65% and the temperature is higher than 30℃ (moisture content>1.8%),
The sample volume is reduced to 0.5 L; for compounds above C4, the sample volume can be increased to 5 L. Aging temperature 350 ℃,
Aging flow 100 ml/min
相關產品
在線留言 |
